Showing all 7 results

  • 3 PIR Dimming Modes : Press the [123] button Dimming : 10LED, 20LED, 30LED Brightness, the indicator light flashes green, which can be detected by the movement of the person in the dark. When the movement within 10ft/120° is detected , LED closet light will turn on immediately. If no motion is detected, the light will automatically turn off after 15 seconds.
    Constant Lighting Mode : Press and hold the button labeled [123] for three seconds, the indicator flashes red, Activate constant lighting mode, you can use the wireless motion sensor LED light as a flashlight and table lamp.
    Wireless Iinstallation : Magnetic LED light easy to install and remove without any other tools. Using the included magnetic 3M tape to stick-on anywhere. When you need to charge, you can take away the under cabinet light at any time.Our original intention of Zeutch is “attach anywhere for instant light”

  • Multi Purpose : Ideal lighting & decoration for cabinet, shelf, stairs, garage, wardrobe, ceiling, attic, hallways, camping, etc.
    Dual Mode Optional – Motion Sensor & Manual Operation. The “ON/OFF” button on the top and the “Man/Auto” switch on the side. When in “Auto” position the light is controlled by motion sensor, but in “Man” ,it runs by the “ON/OFF”.
    Flexible Application – The LED strip with 3M adhesive allows you to quickly mount wherever you need extra light. It can also be cut to the length you need, just use scissors to cut on the little black line where the copper connectors are.

  • 【Super Bright 3 Pack Lights】: 30 Pure White LEDs (Total 180Lumens), more bright than other LED closet lights in the market, provides enough light to ensure you never stumble in the Dark. Not only suitable for small areas, but also large place. 💡Note: The PIR sensor in the middle of light detect the movement, so please face pir sensor to the movement side.
    【New Version Motion Sensor】: These led closet lights can detect the motion of human at night, and daytime in dim light (ambience is dark enough). Auto turn on within 10ft, 120 degree and auto off after about 20 seconds if no motion detected. The lights won’t turn on if the light sensor detect enough light, please switch to always on mode for them to light up. 💡Note: Install them more than 10 feet and don’t face up to each other for sensor mode work great.
    【3 Lighting Modes & 2 Working Modes】: You can set 30% (10 LEDs, 60Lumens), 60% (20 LEDs, 120Lumens), 100% (30 LEDs, 180Lumens) brightness by the button marked 123; Green: PIR motion sensor mode and Red: Always ON. Long press 2-3 seconds for Always ON mode. Note: If the indicator is red, it means the light is in always on mode which couldn’t detect the movement. You could switch it to sensor mode by short press the button marked 123.

  • Power Saving – It supplied by lithium battery(included),without limitation of jack and plug It can be recharged by Android USB Cable.Only lighting up when it picks up your movement, Auto shut-off.
    Dual Mode Optional – Dual Mode Optional – ☼ mode and ☽ mode. When you choose ☼mode,the light will be light on in the day and at night;If you choose ☽mode,the light only be light on in Dark Environment at night.
    Flexible Application – The LED strip with 3M adhesive allows you to quickly mount wherever you need extra light. It can also be cut to the length you need, just use scissors to cut on the little black line where the copper connectors are.

  • ✔ 【Upgrade Version】 30 LEDs, 3 Modes Dimmable + Motion Sensor/Always-ON Modes Switch — 30 LED bulbs in each fixture are surprising them with the amount of light they were expecting. 3 lighting modes cycle BY short press the button labeled 123 – 33% / 66% / 100% Cool White Brightness, you can adjust different modes brightness as needed, very special & humanized. Meanwhile, Long press the button for 3 seconds to switch Sensor/Always-ON Mode
    ✔ 【More Lighting Modes, More Choices】 Free Switch, Meet a wide variety of usage scenarios — 3 Modes Dimmable + Motion & Light Sensor Mode / Always On and Off Mode. In Motion & Light Sensor Mode, this counter light auto turns on when it senses human motion within 10 feet in a dark environment ONLY, and auto turns off after 15 seconds of inactivity. It won’t turn on if the light sensor detect enough light, but you can long press the button in each light mode, switch to always-on mode
    ✔ 【Easy Installation, Stick-ON Anywhere】 Use the Magnetic Strip with 3M tape, stick on anywhere, but only the smooth, flat surface, attach the lamp body to the Magnetic Strip — Suitable for under cabinet counter lighting, closet light, night light, stick on lights, motion sensor light, Kitchen light fixtures, stair lights motion sensor indoor, wireless lights, closet lights battery operated

  • 【PIR motion sensor and LIGHT sensor】 You can select the motion sensor or the light sensor with the button and set the auto-on time. The light sensor means that it is switched on and off at night. The motion sensor distance is 2-5M.
    【30 LED & 3000K Warm White】 With 30 pieces of 2835 LEDs, LUXJET Motion Sensor Light provides enough light to make sure you never stumble in the dark. Fantastic energy saving and environmentally friendly ensures an extra long life for your light.
    【EASY INSTALLATION】 An adhesive strip is easily attached to the lamp body and removable from it. No tools, screws or nuts are required. 30 pieces bright LED, energy saving and environmentally friendly.

  • 💡【Upgraded Version & More Bright Sensor Closet Light】: With 30 LEDs(Not 20 LEDs) for each light, up to 350 lumens, more bright than other LED closet lights in the market, provides enough lights to illuminate dark places, no more fumbling around in the dark to find something.
    💡【Dimming & timing functions】You can set the under counter lighting to 50% and 100% brightness or use the “-”or “+” button to Adjust Brightness from 10%-100%. “S” Auto motion sensor will turn on by moving within 10ft/120° and auto off after 20 seconds. You can also set the led closet light to turn off automatically in 15, 30, 60 or 120 minutes. Note: Timing function cannot be selected in induction mode,Need to press “ON” again, Switch to Always On Mode, and then press the timer function button
    💡【USB Rechargeable & Larger Battery Capacity】USB rechargeable design, Micro USB cable is included. the built-in battery capacity is up to 1500mAh, has larger battery capacity than other led cabinet lighting. After fully charged, these motion sensor led closet lights can last up to 10 hours under instant on mode and 1-2 months under motion sensor mode. Energy Save & Save More Money!

X